Ruisongbuild DIN Standard UPVC Equal Tee PN16 Metric PVC 3-Way Fitting

Description

Ruisongbuild DIN UPVC Equal Tees: Precision Branching for High-Pressure Systems

The Equal Tee is the most widely used fitting for creating 90-degree branch lines in a piping network. At Ruisongbuild, our DIN standard UPVC tees are injection-molded to provide uniform wall thickness and maximum structural reinforcement at the junction point. Designed for high-pressure metric systems, these fittings facilitate smooth fluid distribution without compromising the integrity of the main pipeline.

Technical Specifications & Engineering Compliance

• Material: Heavy-Duty Unplasticized PVC (UPVC / PVC-U).

• Standard Compliance: DIN 8063 (Metric Metric Fittings).

• Pressure Rating: PN16 (1.6 MPa) – Suitable for heavy industrial surges.

• Configuration: Equal Tee (All three openings have the same diameter).

• Size Range (OD): 20mm, 25mm, 32mm, 50mm, 63mm up to 400mm.

• Connection Method: Socket x Socket x Socket (Solvent Weld).

• Safety: Lead-free, non-toxic, certified for potable water distribution.

Why Ruisongbuild UPVC Tees are Superior?

• Reinforced Junction Design: The T-junction is the most stressed point in a branch line. We use extra-thick walls at the intersection to prevent stress cracking under high-pressure pulses.

• Minimal Friction Loss: The internal surface is mirror-smooth, reducing turbulence and energy loss as fluid splits into the branch line.

• Perfect Metric Interference Fit: Precisely tapered sockets ensure a tight bond with DIN pipes, creating a solvent-welded joint that is stronger than the pipe itself.

• Total Corrosion Immunity: Ideal for acidic soil or corrosive industrial fluids where traditional iron tees would fail.

Primary Applications

• Industrial Process Piping: Splitting chemical or process water lines.

• Municipal Water Supply: Residential and commercial branch connections.

• Irrigation Systems: Distributing water from mainlines to lateral sprinkler lines.

• Water Treatment Skids: Complex filtration and dosing manifold systems.

Complete Your Manifold

For a fully controllable branch line, pair our tees with [DIN PVC Ball Valves] and use [DIN PVC Couplings] for straight extensions.

Frequently Asked Questions

Q1: What is an “Equal Tee” in PVC piping?
A: An Equal Tee is a 3-way fitting where all three openings (the run and the branch) have the same diameter. It is used to split a single pipeline into two identical-sized lines or to merge two lines into one.

Q2: Are DIN PVC tees compatible with ASTM (Sch 40/80) pipes?
A: No. These are Metric fittings measured in millimeters (e.g., 50mm). They are not compatible with the inch-based pipes (e.g., 2″) used in North America. Always match your fittings to your pipe standard.

Q3: Can these tees handle high-pressure pumping?
A: Yes. Ruisongbuild DIN tees are rated for PN16 (16 bars of pressure), making them much more robust than standard PN10 fittings. They are ideal for high-pressure water mains and industrial pumping stations.

Q4: How do I install a PVC tee correctly?
A: 1. Clean the pipe ends and the inside of the tee sockets. 2. Apply a thin layer of primer. 3. Apply UPVC solvent cement to both surfaces. 4. Push the pipe into the tee and give it a quarter turn to distribute the cement. 5. Hold for 30 seconds to set.

Q5: What is the lifespan of Ruisongbuild UPVC fittings?
A: When used within their rated pressure and temperature (up to 60°C), our UPVC tees are designed to last over 50 years without rusting, scaling, or pitting.

Contact the Ruisong engineering team today for factory-direct pricing and technical support!