Ruisongbuild Schedule 40 & 80 PVC Tee ASTM D2466 Equal Tee

描述

Ruisongbuild ASTM PVC Tees: The Standard for Reliable Branching

In any rigid piping network, the Equal Tee is the primary fitting used to create a 90-degree branch from a main line. At Ruisongbuild, our ASTM standard PVC tees (also known as 3-way sockets) are injection-molded to provide maximum structural reinforcement at the junction point. Designed for the North American IPS (Iron Pipe Size) system, these fittings allow for a seamless, permanent solvent-welded connection that maintains total system integrity under pressure.

Technical Specifications & North American Standards

• Material: High-Impact Rigid Unplasticized PVC (聚氯乙烯).

• Standards: ASTM D2466 (Schedule 40) / ASTM D2467 (Schedule 80).

• Dimensions: IPS (Iron Pipe Size) system, measured in Inches.

• Configuration: Equal Tee (All three openings have the same nominal size).

• Connection Type: Slip x Slip x Slip (Socket connections for Solvent Welding).

• Safety Status: Lead-free, non-toxic, and safe for potable water.

• Color Identification: White (Sch 40) & Industrial Gray (Sch 80).

Why Ruisongbuild ASTM Tees are the Preferred Choice?

• Reinforced T-Junction: The T-junction is the most stressed point in a branch line. We use specialized molding techniques to ensure uniform wall thickness and added strength at the intersection to prevent stress cracking.

• True Interference Fit: Our sockets feature a precision-engineered taper, ensuring a snug fit with ASTM pipes that facilitates a perfect chemical weld.

• Smooth Flow Bore: The internal radius of our tees is optimized to minimize turbulence and pressure drop as fluid splits into the branch line.

• Chemical & Corrosion Proof: Immune to galvanic corrosion and a wide spectrum of household and industrial chemicals, ensuring a 50+ year service life.

Primary Applications

• Residential & Commercial Plumbing: Creating branch lines for water distribution.

• Swimming Pools & Spas: Building filter manifolds and heater bypass systems.

• Irrigation Systems: Distributing water from main lines to lateral sprinkler grids.

• Industrial Process Piping: Splitting corrosive fluid lines and process water.

Build a Complete System

Ensure a perfect match by pairing these tees with our [ASTM Schedule 40/80 PVC Pipes ]. For directional changes, explore our [ASTM 90 Degree Elbows ].

Frequently Asked Questions

Q1: What is an “Equal Tee” in PVC fittings?
A: An Equal Tee is a 3-way fitting where all three openings have the same nominal pipe size. It is used to branch off a single pipe at a 90-degree angle to create a new line of the same diameter.

Q2: Are Ruisongbuild ASTM tees compatible with Schedule 80 pipes?
A: Yes. We offer both Schedule 40 (ASTM D2466) and Schedule 80 (ASTM D2467) tees. While the outside diameters are the same, Sch 80 tees have thicker walls and higher pressure ratings. It is recommended to match the Schedule of the fitting to the Schedule of the pipe.

Q3: Is an ASTM Tee compatible with Metric (DIN) pipe?
A: 不. ASTM fittings are measured in imperial inches and will only fit pipes following the same ASTM standards. They are not compatible with Metric (DIN) pipes measured in millimeters.

Q4: Do I need to use primer before gluing a PVC tee?
A: Yes. For any pressurized system, we highly recommend using a PVC primer followed by solvent cement. This ensures a true chemical weld between the tee and the pipe, which is critical for the junction point.

Q5: What is a “Slip x Slip x Slip” connection?
A: This means all three ends of the tee are smooth sockets (slips) designed to slide over the end of the pipe and be permanently joined using solvent cement.

Contact the Ruisong engineering team today for factory-direct pricing and technical support!